PT Kawasaki Motor Indonesia increasingly established itself in the class of motor sport in Indonesia. After launching serangkain premium-class motor bike, It is now well again released its latest variant, the ER-6n and the Ninja 650.

"Not only the dimensions and capacity of large machines, all components of the second figure represents the premium motor bike Japan," Okada said San seconds pelucuran Kawasaki ER-60n and the Ninja 650 in La Piazza, Jurong, Friday night 25 November 2011.

Premium motor bike touring is carrying adopt. This was done to provide comfort for the young at heart bikers and like adventure. Striking difference can be seen from appearance, embraced the concept of ER-6n nake bike, ninja 650R apply dengankan aka full fairing shut.

Both carry the 649 cc engine, 4 stroke parallel twin-cylinder DOHC, 8 valve, engine cooling system equipped with liquid form. Energy produced reaches 72.1 horsepower at 8500 rpm and torque of 64 Newton meters at 7000 rpm. Energy transmitted to the wheel with the transmission speed of six floors.

"Despite a capacity large machines, the ER-6n and Ninja 650R still comfortably be used for daily activities. Because offers maximum performance with a soft energy and lower secondary cycle, but it performs worse in topspin," said Service Market Marketing & Sales Division Head PT It is now well, Reiner Sitorus on the same occasion.

Motor fuel tank with a capacity 19 liters, were capable of shooting off to 150-170 km / hr. With fuel consumption of 1:18 miles.

Other eBooks are offered in both the motor frame or Chassis is now using a new twin spar perimeter. Rear lights and exhaust used also using the latest design. The second motor is directly imported from Thailand in the form of intact or completely built up (CBU).

It is now well Kawasaki ER-6n membanderol Rp99 million and for the Kawasaki Ninja 650R an annual Rp 104 million. All prices are on the road in Jakarta. Kawasaki ER-6N is can be ordered from next month, while the Ninja 650R in January 2012. "If the market demand quite a lot, usually to indent diving a month. We are targeting both can be sold 100-200 units per month." he said.

Modification Kawasaki Ninja 250 R at these photos so Attending anon do not say if this is the accepted motor. Indeed if the agenda is still the aforementioned anatomy appearance with a motor That CAME out of the dealership. But, try to see some detail or allotment That sticks. Powerful, Bro! Everything to amplifiers or falsifies Ninja accept moge That beautiful anatomy
"It is an advantage Offered is a anchored anatomy of absolute standards but the accessories accept all up-grade," Loe said Robin X Bike Modification in Jl. Big Mango IX, No. 28, Lokasari, West Jakarta.
For archetype for sokbreker fronts. "It's a accepted appearance and admeasurement are still not absolutely fit, accept a Yamaha R6 so acquired be installed in 2008," said Robin. Appropriate to accept these acutely Acumen with this election
Especially Important and best of the upside down, Had adopted a adorable arrangement for calipers, "Continued the new bride. It is additionally a moge affection produced from 2006 until now. It the agency more, doi decay That no application is too old or old.
In accession to this position the caliper adorable arrangement additionally added Becomes patent. "I do not activity to shake, added anchor and added safety of an advanced Become," added this man baby.
Of advance this is not be denied the appearance That matches the architecture of a quarter-liter motor is. "Because the anatomy appearance That it has moge Ninja, abominably allotment Beneath some support. So, still a little Afraid so afflicted charge be replaced," said length.
"Because the advanced has been absorbing MOGE, legs afterwards let manoeuvered Should additionally balanced," he added. For this time She was tempted to use baseball moge decay a lot of overlap in the Abundance, WHO did Become one provider of waste.
He additionally prefers to use a condom system. Well why is that? "Because the buyer is still a benevolence if the legs afterwards Should Be absolutely overhauled. Yes, the safest band-aid to use a condom," he said.
This condom absolutely archetypal GSX600 imitate. And for now it was additionally produced by him. Wow, so the new merchandise.

 
New Kawasaki Ninja 650R
USA Specifications
MSRP: $7,199 USD
Engine: Four-stroke, liquid-cooled, DOHC, four-valve, parallel twin
Displacement: 649cc
Bore x stroke: 83.0 x 60.0mm
Compression ratio: 11.3:1
Cooling: Liquid
Fuel injection: Digital fuel injection with two 38mm Keihin throttle bodies
Ignition: TCBI with electronic advance
Transmission: Six-speed
Final drive: O-ring chain
Frame: Semi-double cradle, high-tensile steel
Rake / trail: 25 degrees / 4.2 in.
Wheelbase: 55.5 in.
Front suspension / wheel travel: 41mm hydraulic telescopic fork / 4.7 in.
Rear suspension / wheel travel: Single offset laydown shock with adjustable spring preload / 4.9 in.
Front tire: 120/70x17
Rear tire: 160/60x17
Front brake: Dual 300mm petal discs with two-piston calipers
Rear brake: Single 220mm petal disc with single piston caliper
Overall length: 82.7 in.
Overall width: 29.9 in.
Overall height: 47.2 in.
Seat height: 31.1 in.
Curb weight: 449.8 lbs.
Fuel capacity: 4.1 gal.
Colors: Candy Burnt Orange / Flat Super Black,
Metallic Spark Black / Flat Super Black
Warranty: 12 months

New Kawasaki Ninja ZX-6R Specifications

Engine: Four-stroke, liquid-cooled, DOHC, four valves per cylinder, inline-four
Displacement: 599cc
Bore x stroke: 67.0 x 42.5mm
Compression ratio: 13.3:1
Fuel injection: DFI® with four 38mm Keihin throttle bodies, oval sub-throttles, two injectors per throttle body
Ignition: TCBI with digital advance
Transmission: Six-speed
Final drive: X-ring chain
Rake / trail: 24 degrees / 4.1 in.
Frame type: Aluminum perimeter
Front tire: 120/70 ZR17
Rear tire: 180/55 ZR17
Wheelbase: 55.1 in.
Front suspension / wheel travel: 41 mm inverted Showa Big Piston fork with top-out springs, stepless compression and rebound damping, fully adjustable spring preload / 4.7 in.
Rear suspension / wheel travel: Bottom-link Uni-Trak® with gas-charged shock, top-out spring and pillow ball upper mount, dual-range (high-/low-speed) stepless compression damping, 25-way adjustable rebound damping, fully adjustable spring preload / 5.3 in.
Front brakes: Dual 300mm petal rotors with dual radial-mounted, four-piston, four-pad calipers
Rear brake: Single 220mm petal rotor with single-piston caliper
Overall length: 82.3 in.
Overall width: 28.0 in.
Overall height: 43.9 in.
Fuel capacity: 4.5 gal.
Seat height: 32.1 in.
Curb weight: 421.2 lbs.
Color choices: Lime Green / Ebony, Ebony / Flat Black,
Candy Plasma Blue / Ebony
Warranty: 12 Months